Fall Alarm With Voice Alert

For individuals at risk of falls, standing up or getting out of bed unaided can be incredibly dangerous. As a carer, it's vital that you can do everything possible to ensure that elderly individuals under you care don't injure themselves, so it's important that you have a way to prevent them from standing without help.

The Fall Alarm With Voice Alert is a easy to use fall alarm with several applications. It's ideal for use with a bed, wheelchair or chair and enables you to raise an alarm if a fall takes place.

Easy to Set-Up and Use

The Fall Alarm with Voice Alert has a cord with clip that can be attached to a patient. The other end of the cord is attached to the main alarm unit with a magnetic contact. The unit is attached to a bed, chair or wheelchair. If the patient falls from their position, or gets up and walks away from the alarm unit, the cord will pull on the magnetic contact and the alarm will be triggered instantly. The alarm trigger can be either loud or soft depending on your requirements. There is also a silent alert mode with a flashing alert light.

The alarm also features a tamper resistant suspend/reset mode. This will stop the monitoring of the patient temporarily to facilitate patient repositioning without triggering the alarm. A versatile clip and mounting bracket is included with this item.

Voice Alert for Recognisable Help

What's more, the alarm can also be used as a voice alert where a fall does not take place, for instance if the patient gets up out of their chair, The Fall Alarm With Voice Alert allows you to record your own message to be spoken when the alarm is activated. This enables you to record a voice that is familiar to the patient, possibly giving instructions to sit down or to be careful when getting up.

The Fall Alarm with Voice Alert is a stand-alone alarm system. It can also be added to a pre-existing nursecall system via the 6.3mm mono jack on the item. 

Features of the Fall Alarm with Voice Alert

• Bed, wheelchair or entrance alarm with voice function

• Choice of high/low volume or silence mode with flashing light

• Four different alarm tones to choose from

• Record your own alert message or instructions in a voice that is familiar to the patient

• Alert activated by the magnetic switch with cord and clip or optional sensor pads via the RJ9 socket

• Dual use with sensor pad option to alarm when the pad is either stepped on or off

• Also enables caregivers to receive a remote alarm signal if connected to an existing Nursecall system via the 6.3mm mono jack

• Tamper Resistant Suspend/Reset Mode will stop monitoring temporally to facilitate patient repositioning without triggering an alarm

• Battery low indicator to ensure uninterrupted patient monitoring

• Versatile clip and mounting bracket included

• Uses 4 x AA batteries (not included)