Mesh Side Rails for the Harvest Woburn Ultra-Low Profiling Bed

The Mesh Side Rails for the Harvest Woburn Ultra-Low Profiling Bed is designed to reduce the risk of bed falls. They can be lifted when the Harvest Profiling Bed is in a raised position, allowing carers to tend to bed occupants in a safe and efficient manner.

What's Included In My Purchase?

• 2 x Side Rails (one for each side of the bed)

Who Can Benefit from the Harvest Profiling Bed Side Rails?

The Harvest Woburn Ultra-Low Profiling Bed must occasionally be raised to allow carers to tend to its occupant, however this puts the patient at risk of a greater fall. The Harvest Mesh Side Rails can prevent such accidents by blocking the patient from the edge of the bed.

Key Features and Benefits

• Easy to use system for improving patient safety
• Greatly reduces the risk of bed falls
• Supplied with a safety buckle for locking the rails down
• Loops on the rails' corners allow for quick and easy height adjustment
• Only compatible with the Harvest Woburn Ultra-Low Profiling Bed

What Is the Harvest Woburn Ultra-Low Profiling Bed?

Created to lower the risk of injury from falls, the Harvest Woburn Ultra-Low Profiling Bed can be lowered to a height of 65mm. The Harvest Mesh Bed Rails be added to the bed when it is raised to a higher position (e.g. when care is being given) to eliminate the risk of greater falls.

How Do I Install the Harvest Mesh Side Rails?

Detailed instructions for the installation and use of the Harvest Mesh Side Rails can be found in the instruction manual (PDF) below.

Instruction Manual for the Harvest Mesh Side Rails

What Should I Check Before Use?

Before using the Harvest Side Mesh Rails, ensure they have been installed correctly, and that they can be raised and lowered as is intended (as described in the PDF instruction manual above). You should also make sure the zips and straps are working properly and that not part of the rails have not been damaged.

How Do I Use The Harvest Bed Guards Safely?

The bed rails can be easily raised and lowered using the black loops attached to their top corners. The rails should be buckled down when there is no carer present to stop the patient from becoming caught in its components.

How Do I Lock the Rails Down When Not In Use?

Whenever the patient is left unattended and the bed is left in a lowered position, the bed rails should be properly locked down to reduce the risk of injury. This should be done using the two halves of the plastic buckles locating in the outer centre of each bed rail.

Do These Rails Have Holes for Wiring?

There is a gap located in the centre of the right bed rail (i.e. right of the patient when they are lying down in bed). This can be used to feed through tubing as well as wiring for any medical devices.

Can I Clean the Harvest Mesh Side Rails?

These side rails can be cleaned, although you should avoid using any harsh or abrasive cleaners or ironing. The cover can be wiped using a mild detergent, but the netting should be removed from the bumpers before cleaning, and wiped with soap and water (leave the mesh to air dry fully before replacing).

Are These Side Rails Compatible with Other Beds?

The Harvest Mesh Side Rails have only been created for use with the Harvest Woburn Ultra-Low Profiling Bed. Do not attempt to install them onto a different bed as this might affect the rails' function and efficacy, and can potentially put patients at risk.