Oxford Mermaid Bath Hoist Additional Charger

About the Oxford Mermaid Bath Hoist Additional Charger

The Oxford Mermaid Bath Hoist Additional Charger is an additional charger for use exclusively with the electric versions of the Oxford Mermaid Bath Hoist. By purchasing an Oxford Mermaid Bath Hoist Additional Charger the user is able to ensure that they have a fully charged battery pack for their Oxford Mermaid Bath Hoist at all times. The Oxford Mermaid Bath Hoist Additional Charger is excellent for institutions in which the Oxford Mermaid Bath Hoist is used very often. 

Charging Instructions for the Oxford Mermaid Bath Hoist Additional Charger

1. Remove the power supply plug from the POWER/CHARGING POINT socket. The plug is removed with a straight pull. Do not twist the plug in the socket. The battery pack can now be removed from the lift for charging elsewhere or left in place for charging with the lift. To remove the battery pack simply pull the battery pack up by the handle on top of the pack and disengage the pack from the locating pins on the mast. Reverse the process for reconnection.

2. Connect the battery charger plug to the POWER/CHARGING POINT socket. The plug is indexed and can be fitted only one way. Make sure the red locking ring on the charging plug is in the unlocked position (Moulded pointer on the locking ring pointing to the “Unlocked position). Connection is achieved with a straight push and then the locking ring can be twisted to “Lock” position.

3. Plug the charger mains plug into a suitable mains outlet and switch the mains supply ON.

4. Charging is fully automatic. The status of the charging is indicated by two LED indicators (see table below). Note: Even if the charger is left plugged in for extended periods it will not allow the batteries to “overcharge”.

5. To return the lift to service, switch OFF the mains supply, twist the locking ring on the charger plug to “Unlocked” and disengage from the POWER/CHARGING POINT with a straight pull. DO NOT pull on the cable to disengage the plug. The power supply plug can be reconnected with a straight push. Do not twist the plug in the socket. The lift is now ready for use.