TumbleCare Chair Leaving Alarm System With Pager

The TumbleCare Chair Leaving Alarm System With Pager is a fully equipped professional-grade system designed for keeping track of vulnerable patients' movements. Ideal for monitoring individuals at risk of falling or of wandering away from a safe location, the system detects the shift in weight when a patient leaves their chair. Once this shift occurs, a wireless signal is sent the system's pager, alerting carers that the patient is in need of help.

What's Included In My Purchase?

• 1 x Sensor transmittor
• 1 x Radio pager
• 1 x Chair sensor pad
• All required batteries

How Does the TumbleCare Alarm System Work?

The TumbleCare Alarm System consists of a chair pad, an alarm transmitter and a pager. The sensor detects when a patient leaves their chair and sends a radio signal to the pager via the control transmitter. The pager then alerts the carers that a patient is in need of assistance, ensuring they reach the patient in a timely fashion.

How Will the Pager Alert Me?

The pager has three different alarm settings. For use in quiet settings of in the presence of the patient, a quiet vibration setting can be used. To ensure the alarm is heard at other times, it can be set to a vibration with either a low or high toned audible alarm.

What Is the Range of the Transmitter Alarm?

Both the transmitter alarms and the pagers have a transmission range of 100m in open air. As this may be affected by indoor settings, it is recommended that the signal range is tested in different parts of the building prior to use.

Will the System Send An Immediate Alert?

The alarm transmitter can be set to respond immediately after a weight shift is detected, or after a delay of 15 or 30 minutes. The delayed settings can be used when the carer is still in the patient's presence, and then the system can be reset to monitor the patient while they are alone.

Is the Pager Easy To Carry?

The pager is fitted with a strong belt clip that makes it easy to transport and prevents it from being lost or misplaced. It is only 120g in weight, so will not cause any discomfort to the wearer.

How Big Is the Chair Sensor Pad?

The dimensions of the sensor pad are 380mm x 300mm x 8mm. This should fit most types of chairs without difficulty.

How Durable Is the TumbleCare Alarm System?

All components of the TumbleCare Alarm System, including the pager, sensor pad and alarm transmitter are made from incredibly resilient, hardwearing materials, so you can be sure that they will last long after purchase. The chair sensor pad is chlorine proof for better longevity and hygiene maintenance, while the alarm transmitter is supplied with a rubber jacket for an extra layer of protection. This jacket also helps to reduce the risk of shocks during use.

Can This System Monitor Several Patients at Once?

The TumbleCare pager can be paired with 8 separate alarm transmitters. It can therefore be used to monitor up to 8 patients, although additional monitors and sensors are required.

Technical Specifications of the Chair Sensor Pad

• Dimensions: 380mm x 300mm x 8mm
• Cord length: 3M
• Connector plug type: RJ11

Technical Specifications of the Alarm Controller (Transmitter)

• Alarm radio frequency: 433MHz
• Transmission range: 100m (open field)
• Power: Battery 3 x AA 1.5V Alkaline (included)
• Power: DC 6V adaptor 300mA (optional)
• Dual trigger inputs: 1 x RJ11 (pads) 1 x 6.3mm (contact)
• LED warning for low battery
• Led warning for low battery of sensor pad
• Alarm settings: Instant, 15 minute delayed, 30 minute delayed
• Dimensions: 115mm x 75mm x 30mm
• Weight: 130g (without batteries)

Technical Specifications of the Alarm Pager

• Transmission frequency: 433MHz
• Transmission range: 100 metres
• Power: 2 x AA batteries
• Alarm settings: Vibrate only, vibrate and low tone or vibrate and high tone volume
• LED status indicator and active alarm for low battery
• Dimensions: 80mm x 55mm x 22mm
• Device pairing: 8 (low battery channel)
• Fitted with On/Off reset switch
• Weight: 120g